Brass Woven Wire Mesh

These brass meshes are plain square weave (over one, under one). Brass is superior to copper wire mesh in abrasion resistance, tensile strength. Chemical composition: copper and zinc alloy (copper content 60% to 70%) Brass can be soldered with lead or silver solder. Brass may discolor due to atmospheric conditions and is not suitable for salt water use (monel is the best for salt water and stainless steel type 316 is second best). Weaving meets ANSI/AWCI - 01 -1992 and ASTM E 2016-11 and RRW 360. Electrical conductivity is considerably lower than that for copper wire.

Brass Wire Mesh - Examples of Uses

Plumbing screens
Brass decorative lamps
Cabinet screen (see our decorative section)
Ornaments
Filter discs
Sculpture
Papermaking

Specifications of Brass Woven Wire Mesh:

Mesh/2.54 cm	Wire Dia.	Opening	Roll Width	Material
2	1.6002 mm	11.0998 mm	91.44 cm	Brass
4	1.1938 mm	5.1562 mm	91.44 cm	Brass
8	0.7112 mm	2.4638 mm	91.44 cm	Brass
10	0.635 mm	1.905 mm	91.44 cm	Brass
12	0.5842 mm	1.4732 mm	91.44 cm	Brass
16	0.4572 mm	1.1176 mm	91.44 cm	Brass
18	0.4318 mm	0.9652 mm	91.44 cm	Brass
20	0.4064 mm	0.8636 mm	91.44 cm	Brass
30	0.3048 mm	0.5334 mm	91.44 cm	Brass
40	0.254 mm	0.381 mm	91.44 cm	Brass
50	0.2286 mm	0.2794 mm	91.44 cm	Brass
60	0.1905 mm	0.2286 mm	91.44 cm	Brass
80	0.1397 mm	0.1778 mm	91.44 cm	Brass
100	0.1143 mm	0.1397 mm	91.44 cm	Brass

Note: Customized is available.